STIHL MS 181 C-BE Bedienerhandbuch Seite 27
- Seite / 140
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
MS 171, MS 181, MS 181 C, MS 211, MS 211 C
English
25
Keep the chain, bar and sprocket clean;
replace worn sprockets or chains. Keep
the chain sharp. You can spot a dull
chain when easy-to-cut wood becomes
hard to cut and burn marks appear on
the wood. Keep the chain at proper
tension.
Tighten all nuts, bolts and screws except
the carburetor adjustment screws after
each use.
WARNING
In order for the chain brake on your
STIHL chain saw to properly perform its
function of reducing the risk of kickback
and other injuries, it must be properly
maintained. Like an automobile brake, a
chain saw chain brake incurs wear each
time it is engaged.
The amount of wear will vary depending
upon usage, conditions under which the
saw is used and other factors. Excessive
wear will reduce the effectiveness of the
chain brake and can render it
inoperable.
For the proper and effective operation of
the chain brake, the brake band and
clutch drum must be kept free of dirt,
grease and other foreign matter which
may reduce friction of the band on the
drum.
For these reasons, each STIHL chain
saw should be returned to trained
personnel such as your STIHL servicing
dealer for periodic inspection and
servicing of the brake system according
to the following schedule:
Heavy usage – every three months,
Moderate usage – twice a year,
Occasional usage – annually.
The chain saw should also be returned
immediately for maintenance whenever
the brake system cannot be thoroughly
cleaned or there is a change in its
operating characteristics.
For any maintenance of the emission
control system please refer to the
maintenance chart and to the limited
warranty statement near the end of the
instruction manual.
Do not clean your machine with a
pressure washer. The solid jet of water
may damage parts of the machine.
Store chain saw in a dry place and away
from children. Before storing for longer
than a few days, always empty the fuel
tank (see chapter "Storing the Machine"
in the instruction manual).
A cutting attachment consists of the saw
chain, guide bar and chain sprocket.
The cutting attachment that comes
standard is designed to exactly match
the chain saw.
– The pitch (t) of the saw chain (1),
chain sprocket and the nose
sprocket of the Rollomatic guide bar
must match.
– The drive link gauge (2) of the saw
chain (1) must match the groove
width of the guide bar (3).
If non-matching components are used,
the cutting attachment may be damaged
beyond repair after a short period of
operation.
Cutting Attachment
001BA248 KN
1
2
3
a
- STIHL MS 171, 181, 211 1
- Instruction Manual 2
- Manual de instrucciones 2
- 67 - 137 2
- Contents 3
- Guide to Using this Manual 4
- Safety Precautions and 5
- Working Techniques 5
- 001BA275 KN 7
- 001BA113 KN 10
- 001BA114 KN 10
- 001BA087 LÄ 11
- 001BA031 KN 12
- 001BA082 KN 12
- 001BA257 KN 15
- 001BA035 KN 16
- 001BA174 KN 17
- 001BA037 KN 19
- 001BA038 KN 20
- 001BA033 KN 20
- 001BA051 LÄ 21
- 001BA088 LÄ 22
- 001BA143 KN 23
- 001BA150 KN 23
- 001BA144 KN 24
- 001BA145 KN 24
- 001BA147 KN 24
- 001BA148 KN 25
- Cutting Attachment 27
- 533BA001 KN 28
- 143BA003 KN 28
- Mounting the Bar and Chain 29
- (quick chain tensioner) 29
- 135BA011 KN 30
- 001BA229 KN 33
- 001BA240 KN 33
- 001BA218 KN 33
- 001BA219 KN 33
- Chain Lubricant 36
- Winter Operation 39
- Starting / Stopping the 39
- 001BA140 KN 40
- Operating Instructions 44
- 533BA019 KN 47
- 533BA020 KN 47
- 533BA021 KN 48
- Spark Arresting Screen in 49
- Spark Plug 49
- 000BA071 KN 50
- Chain Sprocket 51
- Maintaining and Sharpening 52
- Maintenance and Care 56
- Main Parts 58
- Specifications 60
- Maintenance and Repairs 62
- Disposal 63
- STIHL Incorporated Federal 63
- Emission Control Warranty 63
- Statement 63
- California Exhaust and 65
- Evaporative Emissions 65
- Control Warranty Statement 65
- STIHL Incorporated 65
- Trademarks 67
- Contenido 69
- Acerca de este manual de 70
- Medidas de seguridad y 71
- 001BA234 KN 75
- 001BA238 KN 75
- 001BA239 KN 75
- 001BA040 KN 91
- 001BA146 KN 91
- 001BA153 KN 91
- Accesorio de corte 96
- Montaje de la espada y 98
- 142BA063 KN 100
- 001BA112 KN 100
- 142BA064 KN 101
- Llenado de combustible 102
- 001BA158 KN 106
- 143BA011 KN 107
- 143BA024 KN 107
- 143BA012 KN 108
- 533BA003 KN 108
- Arranque / parada del motor 109
- 143BA018 KN 110
- 143BA019 KN 111
- 143BA020 KN 111
- 533BA004 KN 112
- 533BA005 KN 112
- 533BA006 KN 112
- Cuidado de la espada 114
- 533BA002 KN 115
- 533BA008 KN 115
- 533BA009 KN 116
- Ajuste del carburador 117
- Chispero en el silenciador 118
- 000BA039 KN 119
- Almacenamiento de la 121
- Revisión y sustitución del 121
- 689BA027 KN 122
- 689BA021 KN 123
- 689BA025 KN 123
- 689BA018 KN 124
- 689BA043 KN 124
- 689BA023 KN 124
- 689BA051 KN 125
- 689BA044 KN 125
- 689BA052 KN 125
- Componentes importantes 128
- Especificaciones 130
- 000BA073 KN 133
- Marcas comerciales 138
- Injection 139
- *04585338621D* 140
Verwandte Produkte und Handbücher für Kraftkettensägen STIHL MS 181 C-BE
Kraftkettensägen STIHL MS 261 C-M Bedienerhandbuch
(124 Seiten)
(124 Seiten)
Kraftkettensägen STIHL MS 461 R Bedienerhandbuch
(128 Seiten)
(128 Seiten)
Kraftkettensägen STIHL MS 661 C-M Bedienerhandbuch
(124 Seiten)
(124 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.817 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern