
MS 461
English
39
NOTICE
Always slacken off the chain again after
finishing work. The chain contracts as it
cools down. If it is not slackened off, it
can damage the crankshaft and
bearings.
Short-term storage
Wait for engine to cool down. Keep the
machine with a full tank of fuel in a dry
place, well away from sources of
ignition, until you need it again.
Long-term storage
See "Storing the machine"
Varying cutting lengths, types of wood
and working techniques require varying
quantities of oil.
Standard oil pump
The oil delivery rate can be adjusted as
needed using the adjusting screw (1)
(on the bottom of the machine).
Ematic setting (E), moderate oil delivery
rate –
N Turn adjusting screw to "E" (Ematic
setting)
Increase oil delivery rate –
N Turn the adjusting screw clockwise
Reduce oil delivery rate –
N Turn the adjusting screw
counterclockwise
NOTICE
The saw chain must always be coated
with chain oil.
Oil pump with increased delivery rate
(available option)
The oil pump with increased delivery
rate can be identified by the groove (2)
in the adjusting screw.
With this oil pump, in setting range a, the
oil tank can run empty before the fuel
tank, thus causing the saw chain to run
dry.
N in setting range a, fill the fuel tank
only half full or refill the oil tank
when the fuel tank is approximately
half empty
Oil Quantity Control
Kommentare zu diesen Handbüchern