STIHL Chainsaw MS 170 Bedienungsanleitung PDF herunterladen (Seite 42)

MS 170, MS 170 C, MS 180, MS 180 C

English

Removing the shroud

The shroud catch may vary depending

on the version.

Version A

N Use a suitable tool to open the catch

by turning it 90° to the left

N Lift off the shroud

Refitting the shroud

Install parts in reverse order.

If there is a noticeable loss of engine

power

N Simultaneously press the throttle

trigger lockout and throttle trigger

and set the Master Control lever to

cold start l

N Clean away loose dirt from around

the filter

N Remove the shroud – see "Shroud"

N Pull the filter upwards to remove

N Knock out the filter or blow it clear

with compressed air from the inside

outwards - do not wash

Do not clean fleece filters with a brush!

If the filter cannot be cleaned or is

damaged, replace the filter

N Reinstall air filter

Exhaust emissions are controlled by the

design of the fundamental engine

parameters and components (e.g.

carburation, ignition, timing and valve or

port timing) without the addition of any

major hardware.

Shroud

143BA057 KN

Cleaning the Air Filter

207BA028 KN

Engine Management

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 131 132

Keine Kommentare

STIHL Chainsaw MS 170 Bedienungsanleitung Seite 42